2010 Ferrari 458 Italia, the power Machine

By Raj Savdhariya | Aug 31, 2010

Ferrari 458 Italia 01 2010 Ferrari 458 Italia, the power Machine

The stunning new Ferrari 458 Italia will succeed the famed F430, and is completely new according to the company. The numeric part of the name is derived from the engine displacement (4.5 liters) and number of cylinders (eight), while the Italia name was chosen because Ferrari feels the car exemplifies the flair and passion of its homeland. Of course, it wouldn’t be a new Ferrari without input from legendary F1 champ Michael Schumacher, who aided in the 458’s development since the inception of the project.

Ferrari 458 Italia 02 2010 Ferrari 458 Italia, the power Machine

570 Horsepower:

The 458 will use a new, 4.5-liter direct-injected V-8 producing 570 hp at 9000 rpm and 398 lb-ft of torque at 6000 rpm, and over 80 percent of the latter is available from 3250 rpm. That’s a hefty increase of 87 hp and 55 lb-ft of torque over the already-potent F430. The wheels are 20 inches in diameter one more than the F430’s and the rubber grows, too, measuring 235/35 up front and 295/35 in back. This should add grip that will no doubt aid the Italia in reaching Ferrari’s estimated 0-to-62-mph time of “under 3.4 seconds.” Top speed is a claimed 202 mph. The exhaust will exit through three tips at the back, and prototype photos show what appear to be active flaps integrated into the two outboard tailpipes. A high-performance ABS braking system is said to halt the 458 from 62 mph in just 107 ft with help from a function that lays the brake pads against the standard carbon-ceramic discs once the driver lifts off the throttle. Power will be delivered through a paddle-shifted, seven-speed dual-clutch automated manual transmission that has been geared to take advantage of the new engine’s superior low-end grunt.

Ferrari 458 Italia 03 2010 Ferrari 458 Italia, the power Machine

The chassis of the 458 Italia is constructed of aluminum and suspended by control arms up front and multilinks in the rear. Ferrari promises an even more direct steering ratio, which should help maintain the fantastic turn-in we know from the F430 despite nearly two extra inches of wheelbase and 0.6 inch of additional length (the Italia’s wheels sit 104.3 inches apart). The 458 Italia is 178.2 inches long, 76.3 inches wide, and 47.8 inches tall, which represent increases of 0.6 inch, 0.6 inch, and nothing, respectively. The 458 will boast essentially the same weight distribution as the F430, with 42 percent of its heft over the front axle and 58 percent over the rear.

Ferrari 458 Italia 04 2010 Ferrari 458 Italia, the power Machine

Futuristic Ferrari:

The Pininfarina-designed shell is sure to spark controversy among those particularly fond of classic Ferrari styling: the company calls it a “complete departure from the past.” The futuristic look is sculpted, according to the company, to aerodynamic requirements. The 458’s flat underbody helps airflow, while the overall shape can generate a claimed 309 pounds of downforce at 124 mph. As with similar devices of dubious legality found on Ferrari’s F1 cars, tiny, trick winglets in the nose add downforce and then deform as speed increases. Here, they reduce the area of the radiator inlets and cut drag. The rear of the 458 Italia is a bit reminiscent of the ’s bulbous posterior, but it’s more artfully executed, with myriad details over which your eyes can crawl.

Ferrari 458 Italia 05 2010 Ferrari 458 Italia, the power Machine

Ferrari 458 Italia Specifications:

Body
Wheelbase 2650 mm (104.3 in.)
Chassis
Tires Front 235/35 ZR20 8.5”
Tires Rear 295/35 ZR20 10.5”
Engine
Type: V8 – 90°
Compression Ratio 12.5:1
Engine & Transmission
Displacement cu in (cc): 4499 cc (274.5 cu in.)
Power bhp (kW) at RPM: 570 CV (425 kW)** @ 9000 rpm
Torque lb-ft (Nm) at RPM: 540 Nm (398 lbs/ft) @ 6000 rpm
Exterior
Length 4527 mm (178.2 in.)
Width 1937 mm (76.3 in.)
Height 1213 mm (47.8 in.)
Performance
Acceleration (0-100 km/h) <3.4 s
Emissions 320 g CO2/km
Fuel Consumption 13.7 l/100 km

Ferrari 458 Italia 06 2010 Ferrari 458 Italia, the power Machine

As promised, the interior of the new 458 is purely focused on the driver. Ferrari says the new steering wheel and dash layout come directly from racing practice, which is why the steering-column mounted stalks have been thrown out and the paddle shifters have been lengthened for easier shifts. Turn indicators, the high beams, and the wipers are now activated by buttons on the steering wheel, which is also where you’ll find the switch to alter shock settings. These functions, plus the ignition button and manettino settings, are what Ferrari considers to be the primary driver controls. Secondary functions can be found in two dash pods. To the right of the wheel are a digital speedometer readout and infotainment, Bluetooth, and rear camera controls; to the left reside controls for the optional cruise control and switches for controlling a digital readout and the on-board computer. The new 458 also provides feedback to the driver through three statuses: Warm-Up (operating temperatures are too low), Go (ideal conditions), and Over (some of the components need time to cool).

The Price starting from $150,000.



Related Articles:

    Post Footer automatically generated by Add Post Footer Plugin for wordpress.

    Leave a Comment

    If you would like to make a comment, please fill out the form below.

    Name (required)

    Email (required)

    Website

    Comments

    © 2010 CarBikePrice, - WordPress Themes by DBT